Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

Philippi PSM

Philippi PSM

The PSM Systems Touch Screen Monitor from Philippi monitors, controls and manages the electrical installation on your boat or RV, plus it can monitor tank levels and provide remote switching.

Using a CAN based digital network, communication between the various components is primarily by M12 cable, and is a simple "plug-and-play" installation.

Monitoring is available for up to 16 batteries, 16 tanks, and multiple DC energy loads or sources. Remotely operated Battery Switches can be controlled from the Display or from separate push buttons, and small load switching is available for lights, navigation, entertainment systems, etc.

Multiple Displays can be connected to a PSM system, and the 2.8" x 2.1" high-color, touch-activated screen has attractive and easy-to-identify graphics and commands. Operation is simple, logical, and intuitive, with all set-up procedures being performed on the screen with no computer connection necessary.

A PSM system can be as basic as one Display and one Shunt, and adding components is a simple matter of connecting them in to the network daisy-chain and letting the PSM logic sort out the rest. Software upgrades are made possible via a Micro SD Card reader in the PSM Display.

Display: List / Grid
Sort By:
Philippi PSM Systems Monitoring Starter Kit
The PSM System Monitor from philippi provides the operator with comprehensive information of a vesse..
PSM display
PSM System Monitor Display, with 5m RJ45 - M12 (male) cable. Numerous displays can be connected int..
PSM display, generator
PSM System Monitor Display with generator start output relay. Includes 5m RJ45 to M12 cable. Numero..
SHC - battery shunt
Battery management shunt, powered by a feed from the battery positive. For each battery being fully ..
SHL - load & charge shunt
Shunt for load and charging device, like refrigerator, solar panels, inverter/charger, etc. Installe..
M12 cable
M12 cable to connect each PSM system component. Available in 4 lengths: 1 meter (3.2'), 2 meter (6.5..
Tank Sensor
Monitor tank levels with this ultrasonic tank sensor installed in each tank. A single CMT Tank Modul..
Distance Ring
Distance Ring, 25mm. For balancing the Off-zone of the UTV tank sensor, that extra space necessary t..
Focus Tube
Focus tube for the UTV Tank Senor, in two sizes 40cm (15.75") and 80cm (31.5"). To ensure an accurat..
Tank Sensor Interface
Tank sensor interface, necessary if using either UTV Tank sensor or DFS Flow Sensor. One tank interf..
Tank flow sensor
Another option for measuring tank levels. Measure either by the fill line, as with a water maker, or..
M12 Tees
M12 cable Tees to connect each PSM system component, as necessary. Available in either a standard te..
Adapter Cable
M12 adapter cable, 5 meters (15 feet), M12 female to RJ45...
The end piece in all installations, either as a female or male terminator connection...
Remote Battery Switch
Remote battery switch. 260 amp continuous rated. With M12 connector. Adjustable voltage cut in/cut o..
Go to top

© 2017 Coastal Climate Control - All Rights Reserved