Frigoboat's Keel Cooler, installed on over 40,000 vessels worldwide, offers water-cooled heat exchange for your refrigeration system without the use of a pump. This means no strainers to clean, no noise, and little maintenance.
The Keel Cooler is embedded in sintered bronze, which is primarily copper, making it naturally anti-fouling. Add to this the fact it is warm to the touch when in operation means there should be little sea growth on it.
However, in some areas the water is rich with algae and other sea life and a build-up can occur. Not a problem. Simply use a stiff, nylon brush or green scrubber pad to wipe the accumulation off the keel cooler. Pesky barnacles may require a plastic scraper, but please resist the temptation to use a metal scraper or wire brush. Both of these devices could harm the sintered bronze coating and potentially the embedded cuper nickel tubing containing the refrigerant.
There is quite a collection of Eco-friendly "Barnacle Buster" products that can be used to help dislodge crustations, but please read the instructions carefully.
If you have continued issues with excessive growth on your keel cooler, a single coat of anti-fouling paint can be applied with little to no noticeable loss of performance. Bear in mind, though, that you can then no longer use your keel cooler as a grounding plate for an SSB or other radio device.
Rest assured, your keel cooler should last the life of your Frigoboat system.